Докер для Volumio под Windows:

docker-compose.yml

version: '2'
services:
  volumio:
    build: .
    tty: true
    stdin_open: true
    privileged: true

Dockerfile

FROM debian:latest

RUN apt-get update
RUN apt-get install -y build-essential
RUN apt-get install -y ca-certificates
RUN apt-get install -y curl
RUN apt-get install -y debootstrap
RUN apt-get install -y dosfstools
RUN apt-get install -y git
RUN apt-get install -y jq
RUN apt-get install -y kpartx
RUN apt-get install -y libssl-dev
RUN apt-get install -y lz4
RUN apt-get install -y lzop
RUN apt-get install -y md5deep
RUN apt-get install -y multistrap
RUN apt-get install -y parted
RUN apt-get install -y patch
RUN apt-get install -y pv
RUN apt-get install -y qemu-user-static
RUN apt-get install -y qemu-utils
RUN apt-get install -y qemu
RUN apt-get install -y squashfs-tools
RUN apt-get install -y sudo
RUN apt-get install -y u-boot-tools
RUN apt-get install -y wget
RUN apt-get install -y xz-utils
RUN apt-get install -y zip


WORKDIR /opt
RUN git clone https://github.com/volumio/volumio3-os.git build

В терминале:
cd ./build
/build.sh -b armv7 -d orangepipc -v 3.631

Желаемую версию можно глянуть тут

Aрхитектуру и платформу смотреть тут

Скачать имидж:
docker ps

docker cp {CONTAINER ID}:/opt/build/Volumio-2.0-2024-03-30-orangepipc.zip Volumio-2.0-2024-03-30-orangepipc.zip

После запуска volumio на устройстве:
volumio:volumio

cd \opt
sudo mkdir *чегототам*
sudo chown volumio *чегототам*
cd *чегототам*

Swap на USB флешку
sudo fdisk /dev/sda
1 Type p and press Enter for an overview of the disk.
2 Type n and press Enter to create a new partition. For partition type, enter p and press Enter.
3 Enter the first available sector for the new partition and press Enter. You can also keep the default one offered
4 Press p to verify the partition creation and confirm with Enter.
5 Type t and press Enter to change the partition type. Change the value to 82 and press Enter.
6 To proceed with the changes, type w, and press Enter.

sudo partprobe /dev/sda
sudo mkswap /dev/sda

Готовим среду для Питона 3.8
sudo apt-get install -y build-essential tk-dev libncurses5-dev libncursesw5-dev libreadline6-dev libdb5.3-dev libgdbm-dev libsqlite3-dev libssl-dev libbz2-dev libexpat1-dev liblzma-dev zlib1g-dev libffi-dev

Тут инструкцию взял
export version=3.8.1
3.8.19 не встала

wget https://www.python.org/ftp/python/$version/Python-$version.tgz
tar zxf Python-$version.tgz
cd Python-$version
./configure --enable-optimizations
make -j4
sudo make altinstall
sudo apt -y autoremove

Ставим Руст для пакетов:
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
Выбрал complete

Теперь cmake:

wget https://cmake.org/files/v3.16/cmake-3.16.0.tar.gz
tar -xvzf cmake-3.4.1.tar.gz
cd cmake-3.16.0
sudo ./bootstrap
sudo make
sudo make install

sudo apt-get install libjpeg62-turbo-dev

Теперь можно скачать CamillaGUI

Так как памяти мало придётся ставить пакеты не только из requirements, но и ещё разбить их заисимости отдельно
pip3.8 install aiohttp
pip3.8 install numpy==1.24.4
pip3.8 install matplotlib==3.7.5
pip3.8 install camilladsp-plot[plot]@git+https://github.com/HEnquist/pycamilladsp-plot.git@v2.0.0

Добить:
pip3.8 install .

И вот теперь python3.8 main.py

http://192.168.x.xxx:5005/

The easiest way to make your first post is to edit this one. Go into /_posts/ a nd update the Hello World markdown file. F or more instructions head over to the Jekyll Now repository on GitHub.